ENOVA Logo
Search
Close this search box.
plug 1

Safety Around the Home

Electrical Cord Safety

  • Make sure cords are in good condition–not frayed or cracked.
  • Buy the right cord for the job. Electrical cords are rated for use. Always use the proper cord for the proper conditions.
  • Never place cords in high-traffic areas.
  • Never nail or staple cords to the wall, baseboard or any other object.
  • Do not place cords under carpets, through a doorway, or in places where people may be walking.
  • Pull the plug, not the cord, when unplugging an electrical device.
  • Never touch a plug when your hands are wet, or if you are touching metal.
  • Check to see that cords are not overloaded.
  • Make sure extension cords have safety closures to help prevent shock hazards.
  • Coil up excess cord length and keep the coil intact with plastic ties or Velcro straps.
  • Extension cords are for temporary use. If you need a permanent solution, call an electrician.

Ground Fault Circuit Interrupters (GFCIs)

A GFCI is a sensor attached to electrical outlets that identifies current leakages in an electrical circuit. The GFCI will then interrupt power fast enough to help prevent serious injury from electrical shock.

  • Use GFCIs in any area where water and electricity may come into contact, such as outdoors, or in kitchens, bathrooms or your laundry room.
  • Test GFCIs according to the manufacturer’s instructions monthly and after major electrical storms to make sure they are working properly.
  • Replace all GFCIs that are not working properly, but never replace a GFCI with a standard non-GFCI outlet or circuit breaker. Ensure this work is done by a licensed electrical contractor.

Safely Using Entertainment and Computer Equipment

  • Check to see that the equipment is in good condition and working properly.
  • Ensure there are no cracks or damage in wiring, plugs and connectors.
  • A certified surge protector or power bar will protect your equipment in the event of a voltage surge. Use a surge protector bearing the seal of a nationally recognized certification agency.
  • The best way to protect your electrical gadgets is to unplug them when they are not in use.

Light Bulb Safety

  • Make sure the wattage of your light bulbs aligns with the wattage of your fixtures.
  • Replace bulbs that have higher wattage than recommended.
  • If you do not know the correct wattage for the fixture, check with the manufacturer of the fixture.
  • Screw bulbs in securely. Loose bulbs may overheat.

Halogen Floor Lamps

  • Halogen floor lamps operate at much higher temperatures than standard incandescent light bulbs.
  • Never place a halogen floor lamp where it could touch drapery, clothing or other flammable materials.
  • Be sure to turn the lamp off whenever you leave the room for an extended period.
  • Never use halogen floor lamps in children’s bedrooms or playrooms.

Plug Safety

  • Make sure your plugs fit your outlets.
  • Never remove the ground pin (the third prong) to make a three-prong fit a two-prong outlet as this could lead to an electrical shock.
  • Never force a plug into an outlet if it does not fit. Plugs should fit securely into outlets.
  • Avoid overloading outlets with too many appliances or gadgets.

Using a Space Heater Safely

  • Space heaters are meant to supply supplemental heat.
  • Keep space heaters at least one metre (three feet) away from any flammable materials such as bedding, clothing, draperies, furniture and rugs.
  • Do not use portable heaters in rooms where children are unsupervised and remember to turn off and unplug them when they are not in use.
  • Do not use space heaters with extension cords. Plug them directly into an outlet on a relatively unburdened circuit.

Wiring Safety

  • Unless you are licensed to do electrical work, make sure you hire a licensed electrician for electrical repairs, maintenance and installations.

Additional Electrical Safety Resources

The Electrical Safety Authority (ESA) has a dedicated online resource for homeowners. Visit esasafe.com and learn more about home buying, renovations, buying and selling a home and much more.

If you’re looking to complete work on your home’s electrical system, be sure to hire a licensed contractor to complete the job. Find a Licensed Electrical Contractor near you with this online directory.

Learn about the dangers of low-voltage electrical shocks through this helpful webpage from the ESA.

Find your Service Area

Enter your address below to determine your service location for outage information, accessing forms and managing your account.